Abrasives are leveling agents and create a uniformity of the surface of the finish, otherwise it has microscopic highs and lows that encourage scratch damage. Wrong! The last coat still needs to be rubbed out. I've known woodworkers who, although skilled at the wood mechanics, would use abrasives on every coat but the last. My intent was to match the original sheen of the rest of the piano. I refinished to top of a friends upright piano - at different times it had drink rings and cigarette burns from drunken sing-alongs - using automobile rubbing compound which works very well on wood finishes. For a soft luster one uses oil with the abrasive. In the final stages of really great finishes one goes from the very finest of steel wool to pumice stone and, for a superb finish use rotten stone. This is the same for Ferrari's as it is for gun stocks. Finer and finer and finer abrasives actually create the finish. All finishes, from the first coat to even the final finish, respond to abrasives. I maintain that you can't ruin wood with a so-called botched finish. I think I just need more elbow grease.Īs an old cabinet maker it looks like you're getting the right answers. I can definitely see where some of the waxy stuff has come off - but there is still quite a bit left. I have been rubbing mineral spirits on it all night with a plastic scrub pad. I *think* this is my problem: the wood itself is uniformly colored but on top of that is varying thicknesses of whatever waxy substance is in Tung Oil. I really am not much of a woodworker - the reason I choose Tung Oil is because that is what these rifles were treated with originally. I have never heard of Danish oil, I will have to check it out. In no way I'm saying that this will solve your problem, just throwing it out there for consideration. It makes softer coats with less luster and hardens deep inside the wood. In your case might help blend the uneven stain and make it less noticeable. Sanding will create sort of mud that will help polish the wood, fill the pores and even out the stain. Mvelimir wrote:One thing you can do working with wood and things like tung oil is to use sponge sander and wet-sand between coats.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |